premium series leaning tower of pisa

Leaning Tower of Pisa is the campanile, or freestanding bell tower, of the cathedral of the Italian city of Pisa, known worldwide for its unintended tilt to one side. It is situated behind the Cathedral and is the third oldest structure in Pisa's Cathedral Square (Piazza del Duomo) after the Cathedral and the Baptistry. The tower's tilt began during construction, caused by an inadequate foundation on ground too soft on one side to properly support the structure's weight.
Item#: ICX015
Number Of Sheets 1 Sheet
Difficulty Moderate
Assembled Size 1.5"L x 1.5"W x 3.5"H (3.81 x 3.81 x 8.89 cm)

Ages 14+
Metal Earth Premium Series models are larger in scale with more details. They are more challenging, and at the same time more satisfying, to assemble. Premium Series Leaning Tower of Pisa starts as a 4-inch by 8-inch steel sheet and finishes as a 3.5"H x 1.5" x 1.5" 3D model. Simply use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points. No glue nor solder required. PRODUCT FEATURES • Product features an intricately designed 3D metal model building kit. • The kit consists of detailed laser etching cut onto a 4-inch by 8-inch sheet of thin stainless steel. • Finished product portrays the Leaning Tower of Pisa • Size of finished model: 3.5"H x 1.5" x 1.5" Fascinations®


Remove parts from steel sheet
Join them together
Finished model

Recently viewed products